LED Flat Panel Light 48W 600mm 3 Years Surface Mounted 11mm 120 Degree White
Ado LED Flat Panel Light use high brightness led chips as the light source, it is SMD2835 with 26LM, make flat panel light luminous efficiency up t0 100LM/W, it is more energy saving than traditional lamps, so it is widely used for office, hospital, meeting room and school classroom. Not only the high efficiency, but also bring soft and uniform lighting effect, this is because we adopt Janpan mitsubishi PMMA light guide plate, the technology is laser dot, bring higher light transmittance more than 90% without dark zone. Our led flat panel light is good for eyes, and it is green environmental., long life span is 30000 hours.
2. Important Product Material:
1. LM-80 certified LED with high brightness and low decay
3. Internaitonal Brand Driver: Tridonic, Meanwell. Lifud
4. TUV SAA CB ENEC certified Driver, very stable and long life
5.3. UL Listed led lighting guide plate from Japan Mitsubishi, good light transmittance.
1.Brand: Ado lighting (or given by buyer) 2.Power : 48W 3.Input Voltage:85-265V, 50/60Hz 4. Aluminum frame + Aluminum LED plate + PMMA light guide plate 5. IP Rate:IP44 6. Lumen Efficiency:100lm/w 7. Driver output: DC42V,017A 8. CCT:2700-6500K 9. Power Factor:>0.95; 10. THD:<20%
11. CRI(Ra):>80 12. Energy saving up to 90% 13. 3 years warranty. 14. Working Lifespan:50000 hours
15. Working Temperature:-20~+40 degree
4. Light Guide Plate Details:
1. Aluminum Housing: Aluminum material fixture is good for heat dissipation.
2. LED Driver: PF>0.9, flicker free, CE passed driver, stable isolated IC constant current project
3. LED Chip: Latest imported SMD4014 or SMD2835 led chips for ensuring higher ;umen with LM80, low decay, long lifespan
4. Slim Design: panel light height is only 11mm, perfect slim design
5. Light Guide Plate: Adopt Japan Mitsubishi PMMA LGP, 3mm thickness, uniform lighting, no dark area, soft lighting effect, 90% light transmittance.
6. Diffuser: Taiwan CHIMEI supplied material for diffuser, better glare control
6. Packing Information:
Inner Box Size:
Product Net Weight:
Packing Gross Weight:
7. Product Installation:
1. Before installation to ensure the normal work of the flat lamp, suck back top mounting plate onto the flat lamp.
2. Please according to the actual pitch screw fixed to the ceiling or wall.
3. Both hands lift flat lamp to make the middle hole mounting plate alignment have been fixed screws, to enter, and then move into place.
4. The led driver is fixed to the ceiling or wall, connected to the power supply and AC circuit.